© 2001, 2002 by IOtech, Inc.
October 2002
1061-0940
,
rev.
3.0
IG
-1
DaqBoard/2000c Series
Installation
This guide tells you how to complete the following steps for a successful installation.
Step 2 – Install Boards into Available, 5 Volt, Compact-PCI Bus-Slots
Reference Note:
After you have completed the installation you should refer to the electronic documents that
were automatically installed onto your hard drive as a part of product support. The default
location is in the
Programs
directory, which can be accessed from the Windows Desktop.
You should keep your DaqBoard/2000c Series board’s serial number and your DaqView/2000 authorization
code (if applicable) with this document. Space is provided below for recording up to 4 board numbers and
their compact-PCI bus-slot location. Board serial numbers are located on the 100-pin P4 connector.
Board Type
e.g., DaqBoard/2005c
Serial Number
Compact-PCI Bus-Slot Location
Board 1
Board 2
Board 3
Board 4
Compact PC support for DaqBoard/2000c Series boards varies. A system can support no more than four boards.
*Note
: The DaqBoard/2000c Series boards have their board identity indicated on the latch, as indicated in
the photo on the front page of this guide. This identification is provided since the boards look very
much alike and are visually identical once installed.
DaqView/2000 Authorization Code
____________________________
Customers who ordered DaqView/2000 can find their authorization code on the
authorization code sheet
located inside the
sleeve of the install CD. Customers who did not order DaqView/2000 can run a
30-day free trial version
, as discussed in the
user’s manual.
&$87,21
Take ESD precautions (packaging, proper handling, grounded wrist strap, etc.)
Use care to avoid touching board surfaces and onboard components. Only handle
boards by their edges (or ORBs, if applicable). Ensure boards do not come into contact
with foreign elements such as oils, water, and industrial particulate.
Reference Note:
During software installation, Adobe
®
PDF versions of user manuals are automatically installed
onto your hard drive as a part of product support. The default location is in the
Programs
directory, which can be accessed from the Windows Desktop. A copy of the Adobe Acrobat
Reader
®
is included on your CD. The Reader provides a means of reading and printing the
PDF documents. Note that hardcopy versions of manuals can be ordered from the factory.
Note
: In regard to functionality, the DaqBoard/2000c Series boards are identical to their
DaqBoard/2000 Series counterparts.
