Intelligent keyboard Controller Installation user manual
4. Direct Control
In order to control RS-485 PTZ
，
user needs to add direct control device in keyboard
setting menu—device attributes, and set the correct communication protocol and baud
rate.
4.1 Direct control Log-in
System control keyboard
device01 direct control
【
figure 5-1 keyboard log-in device menu
】
After power on, it displays log-in menu. Input device ID, press
【
ENTER
】
to enter the
following menu:
System control keyboard
Device 01 direct control
User 01 password
【
figure 5-2 keyboard log-in to direct control
】
Input keyboard ID, press
【
ENTER
】，
input correct password and press enter to
输
enter
direct control menu.
note
：
default keyboard password: 000000.
4.2 Direct control menu
Number input
Direct control device 1 user 1
Cam 1 TPELCOP/9600
12345
scan track tour menu close
Description for current device
Current cam No. protocol and baud rate
Info tips
Soft keys
【
figure 5-3 direct control menu
】
4.3 switch camera
Keyboard supports three ways of switching.
（
camera address range 1-256
）：
1、
Input camera ID
，
press
【
CAM
】
2、
Input camera ID
，
press
【
ENTER
】
14
