Intelligent keyboard Controller Installation user manual
【
figure 3-6 Device attributes setting
】
In type selection box, press
【
PREV
】、【
NEXT
】
to select control devices
，
press
【
ENTER
】
to confirm, then it enters the device attribute setting menu for the selected
device.
【
figure 3-7 select device type
】
After select matrix, it enters matrix attribute setting menu. Set matrix IP address, and
press <save> to save setting.
【
figure 3-8 set matrix network attribute
】
After select direct control, it enters pan/tilt attribute setting menu.
需 要
Set
communication protocol and baud rate. Press
【
PREV
】、
【
NEXT
】
to select communication
protocol and baud rate. Press
【
ENTER
】
to move cursor to baud rate selection box. Press
【
CANCEL
】
to move cursor to communication protocol selection box. Press <save> to
save settings.
Communication protocol for selection: TPELCOP
（
relates to PelcoP
）、
TPELCOD
（
relates to PelcoD
）
.
Baud rate for selection: 2400bps
、
4800bps
、
9600bps
、
19200bps.
【
figure 3-9 set pan/tilt direct control attribute
】
After select DVR, it enters DVR attributes setting menu. Set an keyboard ID for
controlling DVR
（
range 1-16
）
. Press <save> to save settings.
Device attributes setting
DVR port RS485
DVR KBD ID 1
save exit
Device attributes setting
Direct control port RS485
Protocol TPELCOP baud rate 9600
save exit
Device 1
Type matrix
exit
Device attributes setting
Matrix IP address
10 .10 .10 .50
save exit
Device attributes setting
【
figure 3-10 set DVR keyboard ID
】
9
