IONX Support Center 1-800-621-8442, [email protected]
_____________________________________________________________________________________
303350 Installation Manual E-Series CMU
Confidential
Revision Date: 9-July-18
Revision: H
Process Owner: Engineering
Page 5 of 47
3
Activating the CMU
Warning: NFC tag reader is not for use in potentially explosive atmospheres. Activate the CMU
on a benchtop in a non-hazardous area.
ATTENTION: Le lecteur d'étiquette NFC ne doit pas être utilisé dans des atmosphères
potentiellement explosives. Activer la CMU sur une paillasse dans une zone non dangereuse.
3.1
Before starting
3.1.1
Confirm your email address is set-up in the IONX TARA system by emailing
[email protected] with “help” in the subject line.
3.1.2
If there is no reply, contact the IONX Support Center (Appendix C) to get your email
address set-up to use TARA and IONXlive.net.
3.1.3
Download the IONX E-series application for NFC reader.
3.1.4
Start Ionx application.
3.2
Place NFC reader device near yellow label of CMU. This wakes the CMU from deep sleep.
3.3
Confirm device wake up message was received using IONX E-series application.
3.4
Alternately, some CMU devices may be activated by removing a magnet, under tape, on the top
surface of the CMU.
3.5 Attach the CMU to the mounting plate or car using the supplied hardware.
3.6 See mechanical installation drawings in Appendix A for specific mounting details
3.7 If the CMU is being mounted to a hatch, be sure the hatch is closed after the CMU has been
mounted (Figure 6).
Figure 6: Final CMU connection to mounting plate
3.8 Associate the CMU with the car according to Section 4.
