IONX Support Center 1-800-621-8442, [email protected]
_____________________________________________________________________________________
303350 Installation Manual E-Series CMU
Confidential
Revision Date: 9-July-18
Revision: H
Process Owner: Engineering
Page 39 of 47
F.4. Carefully lift the power cable from beside the main board and disconnect the battery. Figure F3.
Figure F.3
F.5. Remove the battery pack, and set aside.
WARNING: DO NOT PLACE USED HAZARDOUS BATTERY PACKS IN THE TRASH. THESE SHOULD BE
TAKEN TO A RECYLCING FACILITY THAT CAN PROPERLY DISPOSE OF THEM.
ATTENTION: NE PLACEZ PAS LES PACKS DE BATTERIE DANGEREUX UTILISES DANS LA POUBELLE. CES
DERNIERS DOIVENT ETRE UTILISES DANS UNE INSTALLATION DE RECYCLAGE QUI PEUT LES DISPOSER
CORRECTEMENT..
F.6. Connect a 7.2V power supply or wall wart to the power cable of the core module for a
minimum of
5 minutes
(preferably more) to pre-charge the core, and prevent errors once the new battery is
connected.
[This space left blank intentionally]
