ION Roll Bar Mount, Быстрый старт

Страница: 3 / 22

EN-1
Roll Bar Mount
Quick Start Guide
1. Key Features
 Mount the camera onto the handlebars of bicycles, jet skis, 4x4 ATVs, motorcycles, circular bumper
of SUVs, or ski poles. Fits around any tube or round bars from 30mm to 65mm in diameter.
 Easily remove and remount the camera.
 Capture multiple views (front, side, back, etc.), without remounting the camera.
2. Package Contents
Carefully unpack the package and ensure that you have the following items:
3. Attaching the Ball Joint to Your Camera
1. Fit the screw of the Ball Joint to the tripod socket of the camera.
2. Screw the Ball Joint until it is securely tightened to the camera.
1
Roll bar Mount with
removable ball joint nut
Roll bar Mount screws – Loosen to install the roll bar mount to the
handlebar of bike or pole, re-tighten the nut after selecting
placement and angle.
Ball joint nut- mount the camera on the roll bar mount by tightening
and loosening the ball joint nut
2
Ball Joint with Fix Screw
on top Ball Joint - to be installed into the Roll bar Mount
Fix Screw - for attaching the camera