ION F15R, Руководство пользователя

Страница: 4 / 13

ION F15R 1RU
4
The box should contain the following:
(1) UPS Unit x1
(2) User Manual x1
ION F15R 1RU Line-interactive
UPS 650/1200/1600VA
Installing your UPS System
Unpacking
How to determine the power
requirements of your equipment
Hardware Installation Guide
1. Ensure that the equipment plugged into the
battery power-supplied outlets does not
exceed the UPS unit’s rated capacity. If rated
unit capacities are exceeded, an overload
condition may occur and cause the UPS unit to
shut down or the fuse blow.
2. There are many factors that can affect the
amount of power that your computer system
will require. For optimal system performance
keep the load below 80% of the unit’s rated
capacity.
1. Your new UPS may be used immediately upon
receipt. However, recharging the battery for at
least 8 hours is recommended to ensure that the
battery’s maximum charge capacity is achieved.
Charge loss may occur during shipping and storage.
To recharge the battery, simply leave the unit
plugged into an AC outlet. The unit will charge in
both the on and off position.
2. With the UPS unit off and unplugged, connect the
computer, monitor, and any externally powered
data storage device.
3. Plug the UPS into a 2 pole, 3 wire grounded
receptacle (wall outlet). Make sure the wall branch
outlet is protected by a fuse or circuit breaker and
does not service equipment with large electrical
demands.
4. Depress the power switch to turn the unit on. The
LCD indicator light will illuminate and the unit will
“beep”.
5. To maintain optimal battery charge, leave the UPS
plugged into an AC outlet at all times.
6. To store your UPS for an extended period, cover it
and store with the battery fully charged. Recharge
the battery every three months to ensure battery
life.