Iomega StorCenter px12-400r, Руководство пользователя

Страница: 105 / 179

Securing Your Device and Contents
93
Managing Groups
The page describes how to:

Remove a User from a Group

Change Access Permissions
Removing a User from the Group
1. Open a group to display users belonging to it.
2. To remove a user from the group, click the next to that user. When the Remove user pop-
up window appears, click Yes to remove the user.
Changing Access Permissions
1. To refresh the list of users, click above the table.
2. Expand Access Permissions to change group permissions to a secured Share. If iSCSI is enabled,
you can also change group permissions to secured iSCSI drives.
3. To add permissions to a Share, click Add access permissions .
4. From the Add Access Permissions pop-up window, select a Share or Shares for the group to
access. If iSCSI is enabled, select iSCSI drives for the group to access. Select the checkbox in
the title bar to select all the Shares listed. If iSCSI is enabled, select the checkbox in the title
bar to also select all the iSCSI drives listed.
5. Click Apply to save your changes.
6. In the table listing the Shares, check Read or Write for each Share. If iSCSI is enabled, check
Read or Write for each iSCSI drive. The group can have full access by checking both Read and
Write . To grant only read access, check only Read .
Note: A group must have read access at a minimum. A group cannot have only write access.
7. Uncheck Read to remove all access to a Share and remove the Share from the table. If iSCSI is
enabled, uncheck Read to remove all access to an iSCSI drive and remove the iSCSI drive from
the table.
8. Click Apply to save your changes.
9. If NFS is enabled, the GID field is visible. The GID value must be the same on both the Linux
client and the Iomega StorCenter px12-400r for the client to access files. To modify the GID,
type a new GID value.