Ioimage trk4000 Скачать руководство пользователя | Manualshive

Страница: 51 / 72

background image

Connecting ioibox Unit Video Output to an Analog Device

ioibox or ioicam unit analog video output can be monitored or recorded on analog devices. The
output analog video contains the video from the camera combined with On Screen Display (OSD)
overlays such as, tracking boxes and trails, time stamp, alarm, camera status, etc. These OSD can
be enabled and customized using the ioibox Setup application. For more information, refer to the
ioimage HTML Edition Setup User Guide.

To Connect an Analog Device to the ioibox unit Analog Video Output

•

Using video coax 75

cable, connect to the VIDEO OUT of the ioibox-unit

to the analog device video input of the external device (e.g. the VIDEO IN
of a monitor)

Connecting the External Protective Earth Terminal

ioibox units must have the external protective earth terminal permanently connected to protective earth
according to local regulations and codes.

The protective grounding conductor should be aluminum. The lug of the protective grounding conductor
should be aluminum; washers and screws should be hi Cr stainless steel, or 12% Cr stainless steel, or
Cr on, Ni on steel, tin or steel.
External protective earth stud must be permanently connected to the protective earth.

US + Canada - INSTALLATION CODES

This device must be installed according top the latest version of the country national electric codes. For
North America, equipment must be installed in accordance to the applicable requirements in the US
National Electrical Code and the Canadian Electrical Code.

To Connect the External Protective Earth Terminal

1. On the back right side of the ioibox unit, loose the screw of the protective earth

terminal.

2. Attach a properly rated ground cable according to local code requirements and tighten

the screw.

3. Assure that the other end of the ground cable is connected to protective earth

according to local regulations and codes.

Connecting the Power Supply

Connecting the electrical power to the ioibox unit is recommended as the last connection to be
made. Before connecting to the power, please review

Cautions and Warnings

(page 2) and the

section

Electric/Power Supply Cables

(page 9) sections.

Electrical safety should always be observed.

:

To Connect the Power

1. Connect the power from a properly rated power supply to the Power connector on the

unit panel.

46

«
...
49
50
51
52
53
...
»

Содержание trk4000









































































Отзывы:

Нет отзывов

Похожие инструкции для trk4000

Бренд: Omega Страницы: 16

Бренд: Galleon Страницы: 47

Бренд: EXAGATE Страницы: 8

PRIMERGY RX300 S6

Бренд: Fujitsu Страницы: 132

PRIMERGY RX300 S5

Бренд: Fujitsu Страницы: 112

PRIMERGY RX2540 M4

Бренд: Fujitsu Страницы: 86

PRIMERGY RX2540 M6

Бренд: Fujitsu Страницы: 121

PRIMERGY RX4770 M6

Бренд: Fujitsu Страницы: 468

PRIMERGY RX2540 M1

Бренд: Fujitsu Страницы: 92

PRIMERGY RX2540 M5

Бренд: Fujitsu Страницы: 112

PRIMERGY RX2540 M4

Бренд: Fujitsu Страницы: 639

PRIMERGY RX2540 M2

Бренд: Fujitsu Страницы: 602

PRIMERGY RX2530 M5

Бренд: Fujitsu Страницы: 486

PRIMERGY RX2540 M1

Бренд: Fujitsu Страницы: 438

PRIMERGY RX300 S5

Бренд: Fujitsu Страницы: 66

DPR-1260 - RangeBooster G Multifunction Print Server

Бренд: D-Link Страницы: 55

Бренд: D-Link Страницы: 49

Disk On-line Server NAS-2100

Бренд: QNAP Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды