9
Internet Connection
(Android™)
Option 1: Router Mode
This option is used to convert an Ethernet connection to Wi-Fi
with DHCP support. Note: This is the most common Internet
configuration.
1. Make sure the “NetShair_Nano_XXXX” Wi-Fi network is
connected. Open the NetShair Nano App.
2. On the Home screen, tap
Advance Setting
.
3. Tap
Set Operation
Mode
and then tap
Router
and press
OK
.
4. A notification saying your settings
have been saved will appear, tap
Later
to continue without the
NetShair Nano rebooting.
5. On the Home screen, tap
Advance
Settings
, then
Set WAN
Interface
.
6. By default the NetShair Nano is set
to DHCP client. If the network
requires a username and
password to access, select
PPPoE. Enter the username and
password then tap
OK
.
6. Tap
Restart
to save settings.
7. After the NetShair Nano reboots,
connect an Ethernet cable. The
Network LED indictor will light
solid once a successful connection
has been made.
