IOGear GMFPSU22W6, Руководство по установке

Страница: 22 / 32

22 2
Your printer should be detected and installed au-
tomatically at this point. You can repeat this setup
procedure on all your computers as needed. One
weakness of the Virtual USB technology is that only
one computer can be connected to the printer at a
time. For this reason it is recommended that you
set your printer to auto-connect if you will be using
it regularly. In the Control Center software select
the printer again and click on the
Auto-Connect
Printer button on the toolbar, then on Set Auto-
Connect Printer . You will see a list of all printer
icons available on your computer. Check the box in
front of the appropriate model and click the
Apply
button. Now whenever you print a document the
Control Center software will attempt to automati
-
cally restore the link to your printer.