Inxpect MSK-101, Руководство по продвинутой настройке

Страница: 20 / 34

20
MSK-101 | Advanced configuration manual v1.5 MAY 2018 | msk-101_advanced-config_en_wo v1.5 | © 2017-2018 Inxpect SpA
3. Turn the adjustable support to orient the sensor
direction vertically (barrier application) or
horizontally (volumetric application).
4. Tilt down the adjustable support to reach the
desired sensor inclination.
5. Insert the dongle into its caddy.
6. Connect the dongle and fasten it to the sensor.
For 45° sensor inclinations downwards, see "45°
downward inclination" below. It can be fastened
to the right or left of the sensor.
45° downward inclination
To make the connector for connecting the dongle
accessible, turn the adjustable support by 180°.
Configure the sensor
1. Connect the sensor to the power supply.
2. Start the Inxpect Security application.
3. Select the Wi-Fi network of the dongle connected
to the sensor.
Note: if necessary, enable the Wi-Fi
connection of the mobile device.
4. If required, enter the access password for the
dongle (see the dongle instruction sheet for the
default password).
5. If other sensors are present in the area, assign a
specific channel to the sensor, or select "None".
Installation and use