manualshive.com logo in svg

INW PT2X, Инструкция по эксплуатации

Поделиться
Скачать
INW PT2X Скачать руководство пользователя страница 9

8 

INW - PT2X Instruction Manual

The sensor can be installed in any position; however, when it leaves the factory it is 
tested in the vertical position.   Strapping the sensor body with tie wraps or tape will not 
hurt it.   INW can provide an optional 1/4” NPT input adapter which is interchangeable 
with the standard end cone for those applications where it is necessary to directly attach 
the sensor to a pipe, tank, or other pipe port.  If the sensor is being installed in a fl uid 
environment other than water, be sure to check the compatibility of the fl uid with the 
wetted parts of the sensor.   

Battery Life Calculator

IMPORTANT NOTE for PT2X sensors with fi rmware 2.13 or higher!

PT2Xs with fi rmware version 2.13 and higher have a battery life calculator that is 
set at the factory when batteries are fi rst put in the sensor. If you need to replace the 
batteries, see Appendix E for replacement information and for information on resetting 
the battery life calculator. 

If the battery life calculator is not reset, the remaining life 

information will be incorrect

.

Collecting Data

Following is a brief overview on using Aqua4Plus/Aqua4Plus Lite to collect data. 
Please refer to the software instruction manuals for further details on confi guring and 
using Aqua4Plus/Aqua4Plus Lite.

Real Time Monitor 

Click Single to get a single reading.

Click Start to get a reading once a second for 60 seconds. 

Click Stop to stop the reading.

Note: These are snapshot readings and are not recorded on the sensor. On sensors 
with fi rmware versions lower than 2.0, the pressure is displayed in the fi rst column 
and temperature in the second. On sensors with fi rmware versions 2.0 and higher, the 
temperature is displayed in the fi rst column and pressure in the second. 

Содержание PT2X











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды