INVT iMars BD3KTL-PS, Руководство по эксплуатации

Страница: 34 / 49

iMars BD3KTL-PS Energy Storage Inverter Display panel
29
Text Parameter
Display Area
Fault Code Status Area
Figure 6.2 Main interface
The main interface of the LCD screen is shown as the figure above:
(1) The words on the screen display the current key parameters of the inverter. Three lines of
words are displayed at a time, but if the inverter is in operation or stand-by state, the words
are rolling forward at every 3s. And the user
can press “ ” or “ ” to look up the
information freely;
(2) 5 states of the inverter are displayed on the screen;
(3) If the inverter is in fault or warning state, up to 8 corresponding fault codes can be
displaying on the screen.
6.2.3 Functions operation
Most of the parameters can be viewed and set through the LCD screen and operation panel.
M a i n M e n u
M o n i t P a r a m
S t a t i s t i c s
S e t u p
S y s t e m I n f o
F a u l t I n f o
Figure 6.3 Main interface
(1) Monitoring parameters
Press “ ” and “ ” in the main interface to select “Monit Param”, and then press “ENT” to view
the parameters which is shown in figure 6.4. Go to
the front or next page through “ ” and “ ”
and return through “ESC”.
C u r r e n t S t a t e
E - t o d : 0 W h
$ - t o d :
€
0 . 0 0
P - i n : 0 . 0 0 k W
Figure 6.4 Monitoring parameters