12
1.2 Important safety instructions!
For your own safety, you should read this chapter completely first!
DANGER!
Electric shock due to improper mains connection
Only connect the device to a properly connected mains socket with a mains voltage of 230V ~ / 50 Hz using the
mains adapter supplied. Do not make any changes to the plug-in power supply, cable or socket and regularly
check the insulation of the cable for damage. Never immerse the device in water. Only wipe it with a slightly
damp cloth. Failure to observe this may result in an electric shock, fire and danger to life. If you are unsure,
contact an authorized electrician.
NOTE!
Disconnection from the mains
The mains plug is the main separating element. Unplug the power adapter to completely disconnect the device
from the power source. Make sure that the socket is close to the device and easily accessible. Never use this
device near damp places such as Wash basins, bathtubs or ponds and lakes.
WARNING!
Operating conditions
This product is designed for indoor use only.
Make sure that the power adapter or its cable is never wet or wet
gets wet. Do not place any objects filled with liquids, e.g. Cups or beer bottles, next to or on the device. Avoid
direct sunlight, heavy dirt and strong vibrations. Always handle the power adapter directly. Do not pull on the
cord and never touch the AC adapter with wet hands as this may cause a short circuit or electric shock.
Scope of delivery:
1x "DMXAC8", 1x power cord, 1x user manual.
Please check whether all parts included in the scope of delivery are actually in the packaging!
NOTE:
The power supply is in the side padding in a small, white box!
1.3 Intended Use:
This information sheet contains important information on the safe operation of the device. Make sure that
this information is available to everyone who uses this device.
The type plate and serial number are on the back of the device.
DMXAC8 converter uses the Art-Net protocol to receive and distribute DMX512 signals over the network. The
device has a 10 / 100BASE-T interface (RJ45) for the Ethernet connection and 8 XLR connections for the DMX
output (4096 channels) and 2 for the DMX input (1024 channels). Configuration is carried out directly on the device
using 4 control buttons and an LCD display. The device is intended for rack installation with 1 height unit.
The device is only approved for a power connection with AC voltage, AC100-240V, 50 / 60Hz.
Light control devices such as the "DMXAC8" are sensitive and technically sophisticated devices that must be
handled with care. Therefore, avoid vibrations and the effects of violence during assembly / dismantling and when
using the device.
Use the "DMXAC8" only in places that are protected from dust, moisture and excessive heat. The permitted
operating temperature must be in the range -5 ° to + 45 ° Celsius and the relative air humidity must not exceed
50% (at + 45 °)! Direct sunlight must be avoided during use and also during transport. For your own safety and
that of other people, make sure that there are no cables lying around.
In the event of a thunderstorm, the device must be disconnected from the mains!
Always make sure that no liquid can get into the device!
