involight A-000000-05907, Руководство пользователя

Страница: 14 / 28

13
If damage occurs as a result of non-observance of the intended use and the instructions contained in this manual,
the guarantee will expire and consequences such as short circuit, fire or electric shock as well as falling of the
device (s) can occur. Unauthorized changes to the device are prohibited for security reasons.
The manufacturer is not liable for damage caused by improper installation and
inadequate securing!
Part 2: Installation:
Unpack the device and check it carefully for damage before using it. Place the device in a suitable place. Only
after you have made all connections do you connect the device to a properly wired and grounded socket that
supplies the mains voltage specified in this manual.
Make sure that the power cable is not squashed or damaged by sharp edges
can. Check the device and the power cord for damage at regular intervals.
The cable entry or the coupling on the device must not be subjected to tensile loads. There always has to be one
there is sufficient cable length to the device. Doing so may damage the cable, which could result in fatal electric
shock.
Always insert the power plug last. The power plug must be used non-violently. Make sure that the plug is firmly
seated.
NOTE!
Possible disruptions in data transmission
To ensure trouble-free operation, use special DMX cables and not normal microphone cables.
Part 3: Features:
This DMX splitter has one input and six outputs. Each channel offers you a 3-pin DMX socket for connection.
Inputs and outputs are electrically isolated (the outputs also from each other). Each DMX output is controlled by an
independent bus driver. The LINK output can be conveniently terminated via a switch if you do not want to forward
the DMX signal to any other devices.