involight A-000000-05883, Руководство пользователя

Страница: 18 / 33

17
4.4 TIMER function:
Settings for the interval mode:
Press the "Function" button until "Interval Set" is displayed. Here you can set the interval between the fog
ejections. Use the "UP" and "DOWN" buttons to decrease or increase the value.
Settings for the ejection time mode:
Press the "Function" button until "Duration Set" is displayed. Here you can set the ejection time per interval
ejection. Use the "UP" and "DOWN" buttons to decrease or increase the value.
Settings for the intensity of the output in TIMER mode:
Press the "Function" button until "TIMER Output" is displayed. Here you can set the output per intervaluation. Use
the "UP" and "DOWN" buttons to decrease or increase the value.
Automatic continuous output:
The "Stratus1500DMX" can also produce a permanent fog adjustable in strength. To enable automatic ejection,
press the "Volume" button at the bottom of the center. To stop the ejection, press this button again. Please note
that the machine must heat up from time to time at high output and depending on the ambient temperature! During
this time, no mist can be emitted. The output starts automatically when the machine is reheated. During the heating
phase, the display shows
"Warming Up" .
Settings for the intensity of the ejection in continuous ejection Operation:
To adjust the amount of ejection, press the "Function" button until "Volume" is displayed. Use the "UP" and
"DOWN" buttons to decrease or increase the value.
Manual output: As with conventional fog machines, you can also trigger the fog manually by pressing a button. To
manually eject the fog, press and hold the "Manual" button as long as you want to eject fog. When you release the
button, the ejection stops.
4.5 Setting the fan speed:
To set the fan speed, press the "Function" button until
"Fan Speed" is displayed. Use the "UP" and "DOWN"
buttons to decrease or increase the value.
4.6 Activate the fluid sensor:
The fluid sensor checks whether there is still enough mist fluid in the tank and protects the pump from idling. You
can turn off this sensor as follows:
Press the "Function" button until
"Fluid Sensor" is displayed. Use the "UP" and "DOWN" buttons to set the value
of ON or OFF .
Please note that the pump can be destroyed if the fluid sensor is switched off. When the fluid sensor is activated,
and the machine no longer detects any fluid, it turns off the pump.
4.7 Activate radio remote control:
Press the "Function" button until
"Wireless" is displayed. Use the "UP" and "DOWN" buttons to set the value of
ON or OFF .