involight A-000000-05883, Руководство пользователя

Страница: 17 / 33

16
4.2 Radio remote control (transmitter W-5) (not included in scope of delivery):
Your "Stratus1500DMX" can also be controlled via radio remote control. This makes this fog machine very flexible.
There is an optional transmitter (W-5). The receiver is already integrated into the enclosure and can be activated
via the menu. The remote control has a maximum range of 50 - 80m outdoors. So you can use the
"Stratus1500DMX" ideally also for theater or presentation purposes.
4.3 Explanations of the display and functions:
The machine must first heat up after switching on. The display shows "Warming Up" . After the machine is heated
up, the remote control will show "Ready To Fog" . Now the machine is ready for fogging.
Menu Structure:
Setting the DMX start address:
Press the "Function" button until "DMX512" is displayed. Here you can set the DMX start address. Use the "UP"
and "DOWN" buttons to increase or decrease the value.
Remember, the machine needs 2 DMX channels!
Channel 1 is the fog output (0-255) min. up to max.
Channel 2 is the fan speed (0-255) min. up to max.
DMX is the abbreviation for digital multiplex and allows the digital control of several DMX devices via a common
control cable.
Connect the DMX input of the unit to the DMX output of a DMX controller or other DMX device. Connect the output
of the first DMX device to the input of the second and so on to form a series circuit.
DMX connectors:
A three-pin XLR socket serves as a DMX output, a three-pin XLR connector serves as a DMX input.
For installations with very long DMX cable paths or high electrical interference, such as in a discotheque, it is
recommended to use a DMX terminator. The DMX terminator is connected in an XLR connector as a 120
Ω resistor
between pins 2 and 3 which is plugged into the last output socket of the DMX line.