inVoca
User Guide - Page 55
A. A voice command may not be more than two seconds long. If you
talk more than two seconds, or if there was a long background noise
while you were training a command or
inVoca
was listening for a
command, it will say "
too long
."
Q. I have to keep repeating "louder" and "softer" to adjust volume the
amount I would like. What can I do to reduce the number of times I
need to repeat these words?
A. See Fast Volume, page 27. Fast Volume is a unique
inVoca
feature designed to adjust your volume with just one command.
Q.
inVoca
appears to have difficulty hearing me unless I speak very
loudly.
A. If it is impractical to hold
inVoca
closer to your mouth, and
turning down the television volume does not help, you should try
adjusting the microphone sensitivity control, located inside the battery
compartment. See Page 29.
Q.
inVoca
keeps saying, "too soft," when I train it.
A. Adjust the microphone sensitivity switch, located inside the battery
compartment. See page 29
Q.
inVoca
keeps responding to words it hears on the television or in
background conversations.
A. If it is impractical to turn down the television volume, you should
try adjusting the microphone sensitivity control, located inside the
battery compartment. See Page 29. If this does not help, you should
turn on the Word Spotting feature described on page 46.
Alternatively, you may also try turning on Auto-Mute, described on
page 35.
Q. I pressed the
[Wake_up]
button, but
inVoca
does not respond to
voice commands.
A.
inVoca
will not respond to any voice commands until it has been
trained.
inVoca
User Guide - Page 56
Q. Is there anyway to make the
inVoca
stop listening for commands
after I press the
[Wake_up]
button?
A. If you press the
[Wake_up]
button after
inVoca
is already awake,
it will put the
inVoca
back into the sleep mode.
Q. When I first received my inVoca, I trained it with a lot of trial
commands. Now I want to start over. Is there an easy way to erase
everything I did.
A. See "Erasing
inVoca
's Programming," page 29.
Q. When I try to use the
inVoca
remote, nothing happens, and the
LED does not flash.
A. Check to make sure that the batteries are good and have been
correctly installed. Refer to the Battery Installation section of the
manual.
Q. After I program the
inVoca
remote, it does not work with my
entertainment device.
A. You probably didn't select the correct device code. Refer to the
Detailed Programming section of the manual. If problems persist,
refer to the Auto Search feature.
Q. I tried all the methods, but I still couldn't program the remote
correctly, and I don't see my brand of entertainment device listed in
the code list.
A. Your entertainment device may not be supported by the
inVoca
remote. Call the customer support number: 1 (800) 200-7700.
Q. The remote is acting erratically.
A. The batteries are probably too weak. Refer to the Battery
Installation section and replace them.
Q. My TV takes a long time to change channels after I tell it to go to
a specific channel.
