InVoca inVoca Deluxe, Руководство пользователя

Страница: 24 / 42

inVoca User Guide - Page 47
Adjust Wake Time
To maximize battery life, the inVoca will "sleep" when not in use and
is awakened to listen for voice commands when you press the
[Wake_up]
button. Normally, when you first wake up inVoca , it will
remain awake for 60 seconds. The Wake time may be lengthened as
follows:
1. Press
[AUX]
The LED will flash red once.
2. Press
[PROG]
The LED will flash red twice.
3. Press
[5]
The LED will flash red once.
4. Press
[PROG]
The LED will flash as follows:
1 flash = 1 minute
2 flashes = 5 minutes
3 flashes = 10 minutes
4 flashes = 30 minutes
5. Repeat steps one through four to cycle
through the possible wake time
intervals.
L
Note: The inVoca is "awake" and listening for commands only
when the LED is green. This is independent of the digital LCD
display, which will remain on for a brief interval after a button
press, and may be on even when the
inVoca is not "awake" and
listening for commands.
7
inVoca User Guide - Page 48
SEARCH MODES
inVoca offers two search modes, " Auto Search " and " Manual
Search ," to help you find the correct code for your entertainment
device. When searching for a code using Auto Search or Manual
Search you must first select the appropriate device type.
The
[TV/CD]
device button will search through TVs and TV/VCR
combos.
The
[VCR/DVD]
device button will search through VCRs, TV/VCR
combos and DVD players.
The
[CBL/SAT]
device button will search through cable boxes and
DSS receivers.
The
[Audio/Aux]
device button will search through all codes.
Auto Search for Your Device Code:
If you have trouble programming the device code for inVoca , or can't
find the correct code in the manual, inVoca can cycle through the
available codes automatically to help you locate a usable code. It is
recommended that this feature be used only when all other methods
have failed, as it may take from 7 to 18 minutes for the remote to
locate the correct code, depending on the device list that you are
searching. Note: Auto search will start searching from the currently
programmed device code then cycle through all the codes back to that
point.
1 Power On Manually turn on the device that you want to
auto search (TV, VCR, etc)
2
[TV/CD]
,
[VCR/DVD]
,
[CBL]
, or
[Audio/Aux]
Press the device key for the device type for
which you are searching. For example, to
search for a TV code, press TV once (1
Flash).