inVoca
User Guide - Page 37
L
You can add Personalities at any time, even if you have already
trained
inVoca
to operate without having assigned a Personality. If
you program a set of voice commands, and then record a keyword,
inVoca
will associate all the existing commands to the first
Personality recorded. After that, you must identify yourself before
you record any new commands to insure that they are added to the
correct personality. If you have trained
inVoca
to recognize a large
number of commands, you may wish to erase them, then re-train
inVoca
with the commands for each personality.
7
If personalities are programmed,
inVoca
will normally "wake up"
listening for the last personality used. That is, if "Daddy" was the last
personality used,
inVoca
will wake up assuming that it is still being
operated by "Daddy." To change users, press and release the
[¢]
button then press the
[Wake up]
button. The LED will light orange
which means that it is listening for a keyword to identify the
personality. Once it recognizes a keyword the LED will light green
and
inVoca
will remember the new personality until you change it
again.
Switching to a Different Personality
If several family members typically take turns using
inVoca
, you may
change the operation so that, if personalities are programmed,
inVoca
will always wake up listening for a new keyword. To do this, Press
and release the
[¢]
button then press the
[TV/VCR]
button. The LED
will flash twice.
In this mode of operation, the
inVoca
LED will turn orange when
inVoca
has been awakened by pressing the
[Wake_up]
button.
inVoca
then waits for you to identify the personality that you want to
use. Say the keyword (personality) that you programmed. If
inVoca
recognizes the keyword, it will change the LED to green.
inVoca
will
listen for a keyword for 30 seconds. If it doesn't hear a valid keyword
in 30 seconds it will turn off the LED and go back to sleep.
If it does hear a keyword,
inVoca
will listen for voice commands for
inVoca
User Guide - Page 38
the selected personality only for a period of 60 seconds. If it hears a
legitimate voice command, it will transmit the appropriate IR
command and reset its 60-second timer. The LED will be Green while
it is listening for voice commands and red while it is sending IR
commands.
You may change the operation back by pressing the
[¢]
button then
press the
[TV/VCR]
button again (the LED will flash once).
When you press
[¢]
ÿ
[TV/CD]
If
inVoca
is set up to wake up listening for a
new keyword (personality), the display will
indicate:
If
inVoca
is set up to wake up remembering
the previous personality, the display will
indicate:
To erase a keyword (“personality”)
:
1. Press and release the
[Æ]
button, then press
[REW]
.
2.
inVoca
will respond with “
Beep. Say a keyword
.”
3. Say the keyword you wish to erase.
4.
inVoca
will respond with “
keyword erased
.” (Note: erasing a
personality also erases the commands associated with the personality.
inVoca
Prompts
The
inVoca
Remote Control gives you a visual indication of its status
through its front panel LED and LCD Display, while friendly "voice
prompts" talk you through the process of setting up keys the way you
want. Following is a summary of the voice prompts
inVoca
will
provide:
TV
Wake to ID
TV
Remember ID
