www.InvisibleFence.com
6
Operating Guide
Important: Fully charge unit before initial use. To ensure your pet does not receive an
unintended correction, make sure your pet is not wearing the Computer Collar
®
unit when turning
ON or adjusting the Invisible Gate
®
Plus transmitter.
Charge the Invisible Gate
®
Plus transmitter:
Locate the charging jack on the front edge of the unit near the power button. Connect the
charger connector to the charging jack with the keyed side facing up.
Plug the AC adaptor (RAC00-13701) into a standard 120 volt wall outlet.
Allow the unit to fully charge before initial use and after prolonged storage. A charge
time of 2 hours is required for normal charging.
o
The power button will illuminate red while charging.
o
The power button will illuminate green when charging is complete.
Battery life of approximately 30 days can be expected from a fully charged battery.
The Invisible Gate
®
Plus transmitter will give an audible chirp once every 30 seconds and the
power button will flash red every 5 seconds when the battery is low and charging is required.
Turning ON and OFF the Invisible Gate
®
transmitter:
Turn ON by pressing and holding the power
button until the power button turns from red to green
(approximately 2 seconds). Release the power button. Unit will emit a single beep.
Turn OFF by pressing and holding the power button until the power button turns from red to
OFF (approximately 5 seconds). Release the power button.
Top View
Bottom View
Controls Cover
LCD Display
Mounting Keyhole (2)
Cover Screws (4)
Linking Contacts (4)
Charge Jack
Power Button
Motion Sensors