5
ICT 801
Transmitter
The ICT 801 is a single
loop programmable
transmitter designed for
installations with up to
3,000 feet of signal field
wire and up to 150 feet
of twisted pair wire. The
ICT 801 has one signal
field adjustment to
increase or decrease
the width of the signal
field. See page 11 for
instructions for setting
the signal field width.
User Settings and Functions for ICT 801 Transmitter:
Loop 1:
Loop 1 is always functioning on the ICT 801. (No indicator
light on the circuit board.)
L1 Freq.:
Select either 7K or 10K signal for Loop 1. The default setting
is 7K.
L1 Signal:
Select either Indoor or Outdoor mode for Loop 1. The
default setting is Outdoor.
Mask:
Select either Mask or Xmit to transmit a mask or boundary
signal for Loop 1. The default setting is Xmit.
Saturation:
Indicates Loop 1 transmitter output saturation. Loop
saturation exists when the signal has reached maximum output level,
which is caused by excessive loop size, excessive resistance, or poor
connections.
Batt. Fault:
Indicates when 12VDC backup battery is not installed or
not working properly.
System Indicator Lights
