Signal Field Wire Specifications
I f, for any re a s o n , your Inv i s i ble Fe n c e
®
system does not operate as
d e s c ribed in this manu a l , or if you encounter any difficulty training yo u r
p e t , please call your Inv i s i ble Fence pro fessional immediat e ly.
• Dead or weak Power Cap
®
receiver battery
• Computer Collar
®
not adjusted properly
• Break in signal field wire
• Power not supplied to transmitter or power is out
• Pet needs additional training
• Signal field is too narrow
• Break in signal field wire
• Signal field wire not connected to transmitter
• Power surge to transmitter
• No power from 110v outlet or battery back up
• Transformer plug is loose or disconnected
• Power surge to transmitter
• Dead Power Cap
®
receiver battery
• Signal field wire is disconnected
• Signal field is too narrow
SYMPTOM
CAUSE
Pet Getting Out
Beeping Sound
& LED Steady
(Green or Red)
LED Not Lighted
(Green or Red)
Computer Collar
Receiver
Not Working
13
Service Diagnostic Questions
Signal field wire is solid or stranded
copper, insulated wire, which carries a harm-
less radio signal. There is no hazard in touch-
ing or exposing the wire because the wire
carries only low voltage electricity.
Some installations are unique. The fol-
lowing measurements are guidelines for typi-
cal Invisible Barrier
®
signal field wire
installations.
ICT 775 S TA N DARD CLOSED SYSTEM
Feet of Loop Wire 2000-3000 3100-4500 4600-5000
Feet of Twisted Pair Up to 200
Wire Size 12 AWG 10 AWG 8 AWG
Insulation PE .045”
PE 60mil Jkt
.
ICT 775 3 SIDED SYSTEM
Feet of Loop Wire Up to 2000
Feet of Twisted Pair Up to 200
Wire Size 12 AWG
Insulation PE .045”
Grounding Rods 8’ deep, with a maximum separation of 150’
