Optidrive Eco Advanced User Guide Revision 1.00
G
en
er
al Tec
hni
cal
a
n
d P
e
rfo
rman
ce Da
ta
4
4.
General Technical and Performance Data
4.1.
Electrical Data
4.1.1.
Mains Supply Details
Supply Voltage Range
230 Volt Units – 200 – 240 Volt +10% / -10%
400 Volt Units – 380 – 480 Volt +10% / -10%
600 Volt Units – 500 – 600 Volt +10% / -10%
Supply Frequency
48 – 62Hz
Inrush Current
< rated input current
Power Up Cycles
>120 x / hr, evenly spaced
Single Phase Operation
This is only possible with the dedicated single phase input drives – supplying a three phase drive with
single phase is not possible in this product range
4.1.2.
Motor Control
Output Frequency Range
0 to 500Hz in 0.1 Hz steps
Max Output Frequency = Max Switching Frequency / 16.
Output Voltage Range
0 to Supply Voltage
Speed Regulation
Open Loop < 1% motor rated speed
Effective Switching Frequency
4 – 32kHz – Drive size dependant
Acceleration Time
Four independent acceleration ramps
0 – 600 seconds, 0.01s resolution (Frame 2 & 3)
0 – 6000 seconds, 0.1s resolution (Frame 4 & above)
Deceleration Time
Four individual deceleration ramps
0 – 600 seconds, 0.01s resolution (Frame 2 & 3)
0 – 6000 seconds, 0.1s resolution (Frame 4 & above)
4.1.3.
Overload Capacity
Overload Capacity
110% of rated current for 60 seconds, repeat cycle every 10 minutes.
150% of rated current for 1 second, repeat cycle every 10 minutes
4.2.
Digital & Analog I/O
4.2.1.
Digital Inputs Specification
Voltage Range
8 – 30 V dc, Internal or External supply, NPN (positive logic)
Response Time
< 8ms
4.2.2.
Inhibit (Safe) Input
Voltage Range
Inhibit input 18 – 30V dc
Response Time
Inhibit input < 100us for shutdown
4.2.3.
Analog Inputs Specification
Range
Current : 0-20mA, 4-20mA. 20mA max input current
Voltage: -10-10V (Analog Input 1 Only), 0-10V, 0-5V, 0/24V, 30V max input
Resolution
Analog Input 1: 12-bit + sign, <16ms response time (bipolar)
Analog Input 2: 12-bit, <16ms response time (Uni-Polar)
Accuracy
better than 1% of full scale
Scaling & Offset
Parameter adjustable
4.2.4.
Analog Outputs Specification
Range
Current : 0..20mA, 4..20mA, 20mA max
Analog : 0..10V, 0 / 24V (digital), 20mA max
Resolution
10-bit
Accuracy
better than 1% of full scale
4.2.5.
Relay Outputs (1x N.O, 1x C.O)
Maximum Switching Voltage :
250VAC, 30 VDC
Maximum Switching Current :
5A at 30 Volt DC, 6A at 250 Volt AC
