background image

1

Purpose of the device

RFID MODBUS-10 is used to read the UNIQUE transponders code 
Transponder code is available using the MODBUS RTU protocol.

2 Warranty and liability of the manufacturer

The manufacturer provides a 2-year warranty on the module. The manufacturer also provides post-
warranty service for 10 years from the date of the introducing the module on the market. The 
warranty covers all defects in material and workmanship 

The manufacturer undertakes to comply with the contract of guarantee, if the following conditions 
are met::

all repairs, alterations, extensions and device calibrations are performed by the manufacturer
or authorized service, 

supply network installation meets applicable standards in this regard, 

the device is operated in accordance with the recommendations outlined in this manual

the device is used as intended.

The manufacturer assumes no responsibility for consequences resulting from improper installation, 
improper use of the module, not following this manual and the repairs of the module by individuals 
without permission. 

This device doesn’t contain serviceable parts. The repairs can be done only by manufacturers 
approved repair service. 

Содержание RFID-MB-10














Отзывы: