6.4
Continuous Read Mode
The device allows the user to define the delay of reading TAGs.
The
Continuous Read Mode
means that the same TAG can be read only after
the defined time has elapsed
but
another TAG is read immediately. This means that
the same card will not be accidentally read several times. (30 = 3 seconds)
Attention!
If the user uses this option, the read flag of the new TAG will
NOT
appear.
The device will operate autonomously and automatically allow another reading of the
same TAG after the declared time.
6.5
RS485 – Configuration of transmission
This field is used to configure the communication of the reader with the MASTER device.
MODE
(setting of 9th bit of transmission):
None
Even
– parity bit
Odd
– odd bit
BaudRate
– transmission speed (
1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200
)
Device Address
– device address for Modbus protocol
Card Serial Number –
the field displays the last RFID transponder code read and the
type of card.
Attention! After customizing the settings and saving in the device, it is
necessary to restart the device.
User manual RFID IND Modbus Mif
Page
12
z
22
[B03]
