6.1
Outputs
The reader is has 2 relay outputs. Each output can be programmed separately. The fields
in the Outputs segment are used to configure the output settings.
Mode
– Sets the output mode. The output can work in the following modes:
•
Disable
– output is disabled,
•
Bistable mode –
a relay has one determined status (is engaged or disengaged).
•
Astable
mode – if the channel will be enabled, the relay is engage and disengage
cyclically. Time of engage and disengage relay:
-
Time On
– time when a relay is engaged,
-
Time Off
– time when a relay is disengaged.
•
TIME
– the output will enable for the
Time ON
and then the output will disable
(e.g. the control of the electromagnet).
User manual RFID IND Modbus Mif
Page
10
z
22
[B03]
t
on
t
off
t
on
t
off
t
on
t
off
t
on
t
on
t
on
t
off
t
on
t
off
t
on
t
off
t
on
t
on
t
on
t
off
t
on
t
off
t
on
t
off
t
on
t
on
