VENTILATION -
The ventilation position can be set to different speeds.
• Switch on the appliance using the on/off key .
• Press the speed key . The display shows the set fan speed.
F1: low speed
F2: medium speed
F3: high speed
• Change the fan speed with each press on the speed key .
• The set speed flashes a number of time, after which the display shows the room temperature, which will gradually change
as the room temperature changes.
WIND TYPE -
In addition to normal speeds, the air cooler can be set to a natural wind or soft breeze prior to sleeping.
• Press the wind type key to select the required wind type.
standard
The fan will blow at the highest position.
natural
The fan blows continuously and thus imitates a natural wind by alternating the set speed with a lower speed.
sleep
The speed of the fan is automatically reduced every thirty minutes and eventually remains blowing
at the lowest speed.
COOLING / HUMIDIFYING -
The appliance is able to cool the air flow or humidify the house by adding cold water in the water tank.
Create additional cool air by placing a frozen cooling element in the water in the water tank. The appliance is supplied with
two cooling elements, so you can use them alternately and the appliance is able to cool continuously.
Caution:
only use this mode when the water tank is provided with fresh cold water.
Turn the lock lever of the tank to a horizontal position and carefully pull the water tank
out of the appliance to fill it. Fill the water tank with fresh cold water and make sure that the water level in the water tank does
not exceed the maximum level (MAX).
If you place a frozen cooling element in the water tank, make sure the water level does not exceed the maximum level.
Place the water tank back in the original position and turn the lock lever to the vertical position.
• Switch on the appliance using the on/off key .
• Press the cooling key .
• Press the cooling key once more to switch off the mode.
When cooling mode is switched off, the appliance will only ventilate and the water in the water tank is no longer used
to cool or humidify the air.
Extra instructions
• Always use fresh cold water.
• Make sure the water in the water tank does not come below the minimum level (MIN) when using the cooling or air
humidification mode.
SWING MODE -
By means of the swing mode you can determine the back and forth movements of air flow for a better air displacement.
• Switch the appliance to the required mode.
• Press the swing key and the inner fins start to move to the left and right continuously, as a result of which the air flow
moves back and forth.
• The up and down wind direction can be adjusted manually by pushing the front fins upwards or downwards.
TIMER -
Press the timer key to start the timer. The time period can be set between 1 and 12 hours.
Repeatedly press the timer key to set the required time. The display shows the set time. When the set time has passed,
the appliance switches off automatically.
English
•
15
