prior to first use
3
Follow these instructions when using the appliance for the first time: Carefully unpack the air cooler and all accessories and
remove all packaging material and any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is enough space all around for sufficient ventilation.
Open the flap of the air cooler and check that all mentioned accessories have been supplied.
Press the castors in the four holes at the bottom of the appliance.
Clean the outside of the air cooler with a slightly damp cloth.
Fill the supplied cooling elements with water once. Close the cooling elements. The water in the cooling elements never
needs to be replaced. Place the cooling elements in the freezer until they are completely frozen.
Caution:
the water in the cooling elements is not suitable for consumption. Only use the cooling elements in the air cooler.
The cooling elements are not suitable for use as water bottles or other similar purposes.
Prior to connecting the appliance, check that:
• the connection voltage corresponds with what is stated on the information plate;
• the socket and cord are suitable for the appliance;
• the plug of the cord fits in the socket;
• the appliance is placed on a stable and flat surface.
A mobile air cooler must be placed on a flat surface with sufficient room all around.
Do not block the air inlets and outlets and ensure a free space of minimum 50 cm around the appliance.
FILLING THE AIR COOLER WITH WATER
The air cooler can be filled with water via the reservoir at the top or straight into the water tank.
1. Straight into the water tank
Turn the lock lever of the tank to a horizontal position and carefully pull the water tank out
of the appliance to fill it. Fill the water tank with fresh cold water and make sure that the
water level in the water tank does not exceed the maximum level (MAX - 5 litres).
If you place a frozen cooling element in the water tank, make sure the water level does not
exceed the maximum level.
Place the water tank back in the original position and turn the lock lever to the vertical
position.
2. Via the top
Filling the air cooler is easy via the water reservoir under the flap at the top.
Open the flap and carefully pour fresh cold water into the reservoir. The water ends up in
the water tank via the overflow. Ensure the water level in the water tank does not exceed
the maximum level.
14
•
English
operating the air cooler
4
In addition to cooling, the air cooler has two other modes, i.e. ventilation and air humidification.
The air cooler can be operated via the control panel on the appliance and with the provided remote control.
• Choose a location near a socket.
• Insert the plug in a
socket.
• The appliance gives a short beep sound and enters the standby mode.
• Do not share the socket with any other appliances.
SWITCHING ON AND OFF -
• Manually open the front fins.
• Switch on the appliance using the on/off key .
• The display shows the room temperature and slowly changes as the room temperature changes.
• Press the on/off key once more to switch off the appliance.
