inventum IVW6006A, Руководство пользователя

Страница: 43 / 92

7 Extra information
WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
Level German hardness
[dH]
French hardness [dF] British hardness [dE] Program selector button on
H1 0-5 0-9 0-6 Quick '30, on
H2 6-11 10-20 7-14 Quick '90, on
H3 12-17 21-30 15-21 Quick '90 and Quick '30, on
H4 18-22 31-40 22-28 Eco, on
H5 23-34 41-60 29-42 Eco and Quick '30, on
H6 35-50 61-90 43-63 Eco and Quick '90, on
8 Troubleshooting
GENERAL TROUBLESHOOTING PROCEDURE
1. Try to find a solution for the problem with the help of the troubleshooting table and the fault codes.
2. If the fault code keeps re-occuring, contact the Inventum-servicedienst.
TROUBLESHOOTING TABLE
Problem Possible cause Possible solution
The program does not start. The mains plug is not connected. Connect the mains plug.
There is a problem with the fuse. Do a check on the fuse box.
There is no water supply. Open the water tap.
The door of the appliance is open. Close the door.
The appliance is switched off. Start the appliance. Refer to section
'Starting the appliance'
.
The water inlet hose and filters are
clogged.
Make sure that the water inlet hose
and the filters are not clogged.
The detergent reservoir contains
detergent residues.
The detergent reservoir is filled while
the reservoir was still damp.
Make sure that you fill the detergent
reservoir when it is dry.
The appliance contains water when
the program is finished.
The drain hose is clogged or twisted. • Make sure that the drain hose is
not clogged.
• Make sure that the drain hose is
not twisted.
The filters are clogged. Clean the filters. Refer to section
'Cleaning the filters' .
The program has not finished. Wait until the program is finished.
A buzzer sounds five times when the
program is finished.
The appliance stops during a
program.
There is a power failure. Make sure that there is power.
There is a water inlet failure. Make sure that there is water inlet
supply.
The program is paused. Start the program.
English • 43