heat mode
5
If required, the heat mode can be switched on, so that the
water cooker keeps the water at the set temperature (50-70-
80-90°C) for a period of 30 minutes.
In order to activate the heat mode, observe the steps in
section 4.
Instead of briefly pressing the
on/ off
key, you must now
press the on/ off key for 2 seconds.
The water cooker now heats the water to the set temperature
and keeps it hot for 30 minutes.
Once the temperature is reached, the LED light continues to
burn to indicate that the heat mode is activated.
After 30 minutes, the water cooker switches off
automatically and the water will cool.
When the water cooker is removed from the base, it
automatically switches off completely.
de-scaling
7
Scale may occur on the inside of the water cooker. If you
have hard water, it may be necessary to de-scale the water
cooker occasionally. Use a suitable de-scaling agent for water
cookers/coffee machines and observe the accompanying
instructions.
You can also de-scale the water cooker with lemon juice. The
lemon acid in this juice will make sure that the scale is removed.
This natural method prevents the use of chemicals. Fill half the
water cooker with hot water. Add the juice of half a lemon. Boil
the water and then allow the water to cool down for 30 minutes.
Throw away the boiled water and rinse the water cooker once
more. Never clean the appliance with cleaning agents. These
could damage your water cooker.
In order to remove the anti-scale filter from the water cooker for
cleaning, you must take the water cooker from the connection
base and allow it to cool down. Do not remove the anti-scale
filter from the water cooker if it is still hot or filled with water. Pull
the anti-scale filter loose towards the rear, away from the spout,
and clean it with hot water. When placing back the filter, make
sure it is properly attached to the spout. First place the point of
the anti-scale filter and then you can press tight the anti-scale
filter at the top by means of the clamp. Never place the anti-
scale filter loose in the water cooker.
cleaning & maintenance
8
Regularly clean the water cooker for optimum performance.
Never submerge the water cooker and connection base in
water and/or other liquids. Before cleaning, always remove
the plug from the socket and allow the water cooker to cool
down. Regularly wipe the outside with a moist cloth.
Never
use detergents or abrasive cleaning agents!
12
•
English
switching the water cooker off
6
The water cooker switches off automatically once the set
temperature is reached.
It is also possible to switch off the water cooker at any time
by means of the
on/off
key. When the water cooker is taken
off the connection base while boiling, the water cooker will
also switch off.
Caution!
It is possible that a little condensed water remains
on the edge of the connection base. This is normal and does
not affect the function of the water cooker.
