
troubleshooting
7
26
•
English
In case of a failure in the electronic system, one of the LEDs on the control panel may flash.
Breakdown code
Cause
Solution
LED 6°C flashes
Failure ambient temperature sensor
Contact the Inventum customer service.
LED 3°C flashes
Failure defrost sensor cooler
Contact the Inventum customer service.
LED 2°C flashes
Failure temperature sensor cooler
Contact the Inventum customer service.
Problem
Cause
Solution
Appliance is not functioning;
light does not work
Appliance is not plugged in
Plug the appliance in the socket
Temperature inside the
larder is too high or too low
Thermostat has been set incorrectly
Set the thermostat correctly
Air circulation vents are blocked
Clean the ventilation openings
Appliance is excessively
noisy
Has the appliance been installed
correctly?
Check the installation
Are the pipes at the back touching or
vibrating?
Check it and move the appliance forwards
Note:
gurgling and hissing noises due to expansion in the refrigerant circuit are normal.