INVENTOR V3MFI-24, Руководство пользователя, Страница: 11 / 48

10
WARNING: Manually moving the horizontal and vertical airflow direction louvers
could damage the air conditioner.
OPERATING INSTRUCTIONS
TEST RUNNING FEATURE : This feature is specially designed for maintenance technicians.
UXILIARY
.The test running operation will last 30 minutes regardless of the setting
temperature Press the ADJUST button to check the protective code of T1,T2 and T3.
LOCK FEATURE :
, all the current settings are locked in but the remote controller operation
is available. And the LOCK indicator ( ) illuminates. Push it again to cancel the
LOCK mode.
Press and hold FAN and A FUNCTION buttons together for 3 seconds will initiate
test running feature
Press and hold
and buttons together for 3 seconds will initiate
test running feature.
Turbo operation (on some models): When select this function in cooling mode, the fan motor
will operate at super high fan speed and the set temperature will reach in the shortest time. After
half an hour, the fan speed will revert back to the previous set fan speed. The fan speed can be
adjusted under Turbo operation. When select this function in heating mode, for the unit without
PTC heater, the Turbo indicator lights up without fast heating operation. This function is available
on cooling mode only. For the unit adopts PTC heater, the PTC heater is activated and brings
faster and stronger heating.
NOTE: This function is not available under sleep operation.
Timer ON operation: Use the ON timer to turn on the air conditioner at the desired time
(between 0~24hrs). After selecting the Timer ON feature, press the and button to
select the desired time, each press will increase/decrease the Auto-timed setting in 30 minute
increments. Once the desired time is established, press the AUXILIARY FUNCTION button to
register the Auto Timer-ON program.
Timer OFF operation: Use the OFF timer to turn off the air conditioner at the desired time
(between 0~24hrs). After selecting the Timer OFF feature, press the and button to
select the desired time, each press will increase/decrease the Auto-timed setting in 30 minute
increments. Once the desired time is established, press the AUXILIARY FUNCTION button to
register the Auto Timer-OFF program.
NOTE: To cancel the timer settings, press the AUXILIARY FUNCTION button, then use the
and buttons to select ON/OFF timer, press the AUXILIARY FUNCTION button
again to cancel.
Horizontal Airflow Direction(AUTO)
The Left/Right(Horizontal Airflow) can be adjusted by using the remote control or unit control.
Press the"AUXILIARY FUNCTION" button on the unit control panel, then press the
and
button to select the feature and the louvers will swing left and right.
Repeat the above procedures to stop the swing operation.
Vertical Airflow Direction(AUTO) (on some models)
The Up/Down(Verticall Airflow) can be adjusted by using the remote control or unit control.
Press the"AUXILIARY FUNCTION" button on the unit control panel, then press the
and
button to select the feature and the louvers will swing up and down.
Repeat the above procedures to stop the swing operation.
Airflow Direction Control