INVENTOR RS-WUI-08L, Руководство пользователя

Страница: 17 / 56

17
EN
Why there is still
condensation from the
windows, even by using
the dehumidifier?
When the room reaches the preferred humidity
level, there is a possibility of humidity appearance
on windows. This happens due to the temperature
difference of the room’s and external ambient
temperature. Keep running the dehumidifier and
when the air temperature outside increases the
windows should clear of condensation.
The dehumidifier is
not a heating device.
What could be the
cause of warm air being
extracted?
The desiccant dehumidifier Rise Pro, operates with
an electrical resistance that warms up the desiccant
material. As a result, the temperature of the outgoing
air has been increased to 10°C comparing to the
room’s temperature. This doesn’t denote in any case
that this device can be used as a heating appliance.
Why the dehumidifier does not collect water inside the water tank
during the operation?
The dehumidifier has a separate FAN ONLY function, during which no
dehumidification takes place. Please check if you have selected this mode and try
to adjust the humidity levels. If the relevant button beeps without any change, then
try to turn off the FAN ONLY function following the steps from this user's manual.
The unit does not start
l
Make sure the dehumidifier’s plug is placed completely into the socket.
l
Check the house fuse/circuit breaker box.
l
Check whether the power cord is damaged.
l
Check the water bucket, if it is full, empty it.
l
Check if the dehumidifier has reached its preset level.
l
Make sure the water bucket is positioned properly.
l
Room temperature is lower or higher than the advised operational range.
l
Check whether the humidity level has been set in high levels
Dehumidifier does not dry the air as efficient
l
Make sure that the dehumidifier has been operating enough time to remove the
moisture.
l
Make sure there are no curtains, blinds or furniture blocking the front or back of the
dehumidifier.
l
The humidity selector may not be set low enough.
l
Make sure you have cleaned the filter as suggested. Clogged filter may result in
reduced performance.