INVENTOR RS-WUI-08L, Руководство пользователя

Страница: 18 / 56

18
EN
l
All house exits (windows doors etc) where the dehumidifier is operating, should be
shut.
l
Room temperature is below the advised operational range.
l
There is a kerosene heater or something giving off water vapor in the room.
l
The room that the device is placed is bigger than suggested.
l
The humidity level is too high.
The unit makes a loud noise when operating
l
The air filter is clogged.
l
The device is titled instead of being in an upright position.
l
The floor surface is not flat.
During the use of the drain hose, you may find water inside the water
tank
l
Check that the drain hose has been correctly placed.
l
The drain hose has been blocked or damaged.
Error codes
l
C1: NTC1 is open cut or short cut
l
C2: NTC 2 is open cut or short cut
l
C3: NTC1 &NTC 2 are open cut or short cut
l
C4: Sync motor failure
l
88: Temperature and humidity sensor failure
l
P2: Water tank full
l
P3: Pre-filter clean reminder
All the pictures in the manual are for explanatory purposes only. The actual shape of the unit
you purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and
the specifications of the product for reasons, such as product improvement, are subject to
change without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for
further details. Any future updates to the manual will be uploaded to the service website, and
it is advised to always check for the latest version.
Scan here to download the latest version of this manual.
www.inventorappliances.com/manuals