Inventor Air Conditioners L4VI32-16, Руководство по обслуживанию

Страница: 75 / 96

Installation and Maintenance
71
Service Manual
99
Installation and Maintenance
Service Manual
11. Removal Procedure
11.1 Removal Procedure of Indoor Unit
Caution: discharge the refrigerant
completely before removal.
Location of
step motor
Axile bush
Horizontal louver
Right filter
Front
case
Groove
Left filter
Front panel
Open the front panel. Push the left and
rightfilters to make them break away from
thegroove on the front case. Then remove
the leftand right filters one by one.
Push out the axile bush on horizontal louver,
Bend the horizontal louver with hand and
then separate the horizontal louver from the
crank shaft of step motor to remove it.
Separate the panel rotation shaft from
the groove fixing the front panel and then
removes the front panel.
Screw off the 2 screws that are locking the
display board.
1.Remove fifter assy
2.Remove horizontal louver
3.Remove panel and display
Panel
Screws
Screws
Front panel
Panel rotation
Groove
A1display
100
Installation and Maintenance
Service Manual
Screws
Electric box cover
Detecting plate(WIFI)
Screw
Electric box cover2
4.Remove electric box cover 2
5.Remove front case sub-assy
6.Remove display
Remove the screws fixing front case.
Note:
①
Open the screw caps before removing the
screws arround the air outlet.
②
The quantity of screws fixing the front
case sub-assy is different for different
models.
Loosen the connection clasps between front
case sub-assy and bottom case. Lift up the
front case sub-assy and take it out.
Screw off the 2 screws that are locking the
display board.
a
b
Remove the screws on the electric box
cover 2 and detecting plate(WIFI), then
remove the electric box cover 2 and
detecting plate(WIFI).
Note:The position of detection
board(WIFI) may be different for different
models.