inVENTer aV100 ALD, Инструкции по эксплуатации и уходу

Страница: 10 / 14

18 19
OPERATION OPERATION
18 19 aV ALD ventilation device | Operating and cleaning instructions aV ALD ventilation device | Operating and cleaning instructions
Requirement
• The inner cover panel has been removed.
• The filter cartridge has been removed.
► Carefully remove the sound insulation lining from
the Inventin
®
.
► Carefully remove the Inventin
®
from the wall
sleeve.
► Clean the sound insulation lining and Inventin
®
with
a damp cloth
► Insert the Inventin
®
back into the wall sleeve
► Reinsert the sound insulation lining into the
Inventin
®
.
 You have cleaned the sound insulation lining and
the Inventin
®
.
4.3 Attaching the inner cover panel
ALD100 inner cover | Light ALD inner cover
Requirement:
• The filter cartridge is installed.
► Attach the top of the inner cover to the locking hook
on the casing.
► Fold the lower area onto the casing.
The inVENTer logo is located at the bottom
right.
 All spacers noticeably snap in.
 You have attached the inner cover.
Flair Zero ALD inner cover
► Replace the cover on the four spacers.
The inVENTer logo is located at the bottom
right.
► Press the locking lugs inwards on the spacers.
► Slide the cover onto the spacers.
 All spacers noticeably snap in.
 You have attached the inner cover.
Clean the sound insulation lining and Inventin ®
1
2
1
2
Once the sound insulation mats have been
removed, access to the wall sleeve is clear.
Wipe the wall sleeve down with a damp cloth
before reinserting the insulating mats.
i
NOTICE:
Using harsh cleaning agents or
rough cloths can scratch the surface of the
mats!
• Clean the sound insulation lining and
Inventin
®
carefully.
11
22
22
11
!
!