Invacare Typhoon II Скачать руководство пользователя страница 62

Страница: 62 / 150

8.3

Manually adjusting the backrest

8.3.1 Adjusting the backrest using the gas pressure spring

The lever for adjusting the backrest is located on the opposite side from the Joystick Box under the
armrest.

The angle can be adjusted continuously between 0° and 30°.

Adjusting angle of the backrest

•

Pull lever (1) upward.

•

Adjust backrest angle by leaning forward or
backward.

•

Release the lever again. The backrest is locked at
the desired angle.

NOTE

If the lever is pulled upwards and inwards at the same time, it will latch into a notch at the top.
Push the lever out of the notch to release it, and allow it to be moved down again.

Содержание Typhoon II























































































































































Результаты поиска

Содержание Typhoon II

Отзывы:

Похожие инструкции для Typhoon II

Бренды по названию

Популярные бренды

Invacare Typhoon II, Руководство по эксплуатации

Результаты поиска

Содержание Typhoon II

Отзывы:

Похожие инструкции для Typhoon II

Бренды по названию

Популярные бренды