Invacare® Top End®
10.4 Replacing Push Rims
Fig. 10-4
1.
Remove the rear wheel
A
from the racing chair.
2.
Loosen the mounting screws
B
that secure the existing
pushrim to the rear wheel.
3.
Remove the existing pushrim.
4.
Install the new pushrim onto the rear wheel and
securely tighten.
For standard wheel, ensure the rim is pushing
onto the spokes at the top of the rear wheel.
5.
Reinstall rear wheel onto the racing chair.
10.5 Replacing Front Wheel
Reverse the steps below to remove the front wheel.
There will be some play in the front wheel. This is
common in all front hubs.
Fig. 10-5
1.
Remove the two hex axles
A
from the front wheel
B
.
2.
Line up the mounting holes in the front wheel with the
holes in the forks .
3.
Install the hex axles and securely tighten the front
wheel to the fork.
44
60001470-A
