Invacare Storm4 X-plore Скачать руководство пользователя страница 83

Страница: 83 / 180

•

Remove the seat cushion.

•

Remove the cover plates (1).

•

Undo the two Allen screws (6) at the rear on the crossmember and remove them.

•

Undo the two Allen screws (9) at the front on the seat support plate and remove them.

•

Loosen the four Allen screws (7) and (8) which are located at the front and back to the sides of

the seat support plate to release tension so that the plate can be moved more easily. Do not,
however, remove these screws completely.

•

Pull or push the seat support plate (2) the required width. A scale (3) has been fitted to the

bottom part of the seat support. Use this scale to read off the seat width in centimetres.

•

Repeat these operations on the other side of the seat.

•

Now tighten all the screws again.

Содержание Storm4 X-plore





















































































































































































Результаты поиска

Содержание Storm4 X-plore

Отзывы:

Бренды по названию

Популярные бренды

Invacare Storm4 X-plore, Руководство пользователя

Результаты поиска

Содержание Storm4 X-plore

Отзывы:

Бренды по названию

Популярные бренды