Invacare Storm4 X-plore Скачать руководство пользователя

Страница: 80 / 180

9.10.2 Adjusting the depth of the tray / removing the tray

•

Loosen the wing-screw (1).

•

Adjust the table to the desired depth (or remove it entirely).

•

Re-tighten the screw.

9.10.3 Swinging the tray away to the side

The tray can be swivelled up and away to the side to allow the user to get in and out of the mobility
device

CAUTION! Risk of injury! When the tray is raised it does not lock in place in this position!

•

Do not tilt the tray up and leave it leaning in this position.

•

Never attempt to drive with the tray tilted up.

•

Always lower the tray in a controlled manner.

Содержание Storm4 X-plore





















































































































































































Результаты поиска

Содержание Storm4 X-plore

Отзывы:

Похожие инструкции для Storm4 X-plore

Бренды по названию

Популярные бренды

Invacare Storm4 X-plore, Руководство пользователя

Результаты поиска

Содержание Storm4 X-plore

Отзывы:

Похожие инструкции для Storm4 X-plore

Бренды по названию

Популярные бренды