manualshive.com logo in svg

Invacare Storm4 X-plore, Руководство пользователя

Поделиться
Скачать
Invacare Storm4 X-plore Скачать руководство пользователя страница 49

 

49

 

9.1 

Adjustment possibility for control panel 

The following information is valid for all seating systems. 

 

 

 

 

CAUTION: Danger of the control panel being pushed backwards during an accidental 
collision with an obstacle, such as a doorframe or table, and the joystick being jammed 
against the armpad if the position of the control panel is adjusted and all screws are not 
completely tightened! This will cause the mobility device to drive forward uncontrollably 
and potentially injure the mobility device user and any person standing in the way! 

• 

When adjusting the position of the control panel, always make sure to tighten all screws 
securely! 

• 

If this should accidentally happen, immediately switch the mobility device electronics OFF at 
the control panel! 

 

9.1.1  Adjust the control panel for the length of the user's arm (all seat systems) 

 

• 

Loosen wing bolts (1)†. 

• 

Shift the remote control forwards or backwards to 
the desired distance. 

• 

Retighten the bolt. 

Содержание Storm4 X-plore





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды