<1>
Table of Contents
1.0
Tools Required
2.0
Installation Overview
3.0
Before Installation - Important!
4.0
Mounting Hardware & Back Installation
5.0
ETAC Wheelchair Recline Adjustments
(for greater seat depth)
Hex Key (5mm): (provided)
Hex Key (2mm): (provided)
Wrench (13mm)
Tape Measure/Ruler
1.0 Tools Required
2.0 - Installation Overview
Our
ETAC Mounting Hardware
has been uniquely designed to allow the mounting
of our MaTRx-PB and Matrx-PB Elite Back Cushions
*
onto an ETAC wheelchair. The
ETAC hardware utilizes a unique mounting clamp, specially designed to install onto the
back canes of an ETAC wheelchair. The remaining hardware utilizies the same com-
ponents as our standard easy-set mounting hardware, thereby providing clients with
the same ease of installation & adjustment they have grown accustom to.
*Important!
the ETAC Mounting Hardware is
not recommended
for use with
our Heavy-Duty Matrx backs.
EN
TRD0305- ETAC Mounting Hardware Installation Instructions- Europe, Rev 1.0_Layout 1 29/02/2012 12:43 PM Page 2
- 2 -
