Invacare® FDX®
7.
Fit the two Allen screws (9) at the front of the seat
support plate.
8.
Refit all the parts you have removed.
5.15 Backrest unit with ergonomic length
compensation (Easy-Adapt)
5.15.1 Adjusting the width
Also refer to the previous chapter entitled
The seat can be adjusted in stages between 380 and
530 mm.
Tools:
•
4 mm Allen key
1.
Remove the backrest cushion.
2.
Loosen the three Allen screws (1). Do not, however,
remove these screws completely.
3.
Push the plate (2) as far as required until the required
width in cm can be read off the scale (3).
4.
Tighten the three Allen screws again.
5.
Repeat these operations on the other backrest plate.
6.
Attach a backrest cushion of the required width.
5.16 Center-mounted legrests — manually
adjustable
5.16.1 Removing the legrest
You can remove central, manually adjustable legrest
completely.
58
1541361-N