Invacare Everyday HP Crossfire T6 Скачать руководство пользователя

Страница: 6 / 64

SPECIAL NOTES

Crossfire

™

Series Wheelchairs

Part No 1134872

SPECIAL NOTES

Signal

words

are

used

this

manual

and

apply

hazards

unsafe

practices

which

could

result

personal

injury

property

damage.

Refer

the

table

below

for

definitions

the

signal

words.

NOTICE

THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO

CHANGE WITHOUT NOTICE.

WARNING

As a manufacturer of wheelchairs, Invacare endeavors to supply a wide variety of

wheelchairs to meet many needs of the end user. However, final selection of the

type of wheelchair to be used by an individual rests solely with the user and his/her

healthcare professional capable of making such a selection.
WHEELCHAIR TIE-DOWN RESTRAINTS AND SEAT POSITIONING STRAPS
Invacare recommends that wheelchair users not be transported in vehicles of any

kind while in wheelchairs. As of this date, the Department of Transportation has not

approved any tie-down systems for transportation of a user while in a wheelchair, in

a moving vehicle of any type.
It is Invacare’s position that users of wheelchairs should be transferred into

appropriate seating in vehicles for transportation and use be made of the restraints

made available by the auto industry. Invacare cannot and does not recommend any

wheelchair transportation systems.

WARNING

SEAT POSITIONING STRAP - ALWAYS wear your seat positioning strap. Inas-

much as the seat positioning strap is an option on this wheelchair (you may order

with or without the seat positioning strap), Invacare Top End strongly recommends

ordering the seat positioning strap as an additional safeguard for the wheelchair

user. The seat positioning strap is a positioning belt only. It is not designed for use as

a safety device withstanding high stress loads such as auto or aircraft safety belts. If

signs of wear appear, seat positioning strap MUST be replaced IMMEDIATELY.

SIGNAL WORD

MEANING

DANGER

Danger indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.

WARNING

Warning indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.

CAUTION

Caution indicates a potentially hazardous situation which, if not avoided, may result in
property damage.

Содержание Everyday HP Crossfire T6

































































Результаты поиска

Содержание Everyday HP Crossfire T6

Отзывы:

Похожие инструкции для Everyday HP Crossfire T6

Бренды по названию

Популярные бренды

Invacare Everyday HP Crossfire T6, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Everyday HP Crossfire T6

Отзывы:

Похожие инструкции для Everyday HP Crossfire T6

Бренды по названию

Популярные бренды