background image

SECTION 3—SAFETY INSPECTION

Part No.1125095

21

Transport Chairs

Inspect/Adjust Weekly

Ensure the transport chair rolls straight (no excessive drag or pull to one side).

Inspect for cracked, broken or loose spokes.

Ensure the wheel/fork assembly has proper tension when caster is spun. The caster 
should come to a gradual stop.

Ensure the hand brakes do not interfere with tires when rolling.

Ensure the hand brake pivot points are free of wear and looseness.

Inspect/Adjust Monthly

Inspect for any loose or broken hardware on the transport chair.

Inspect back cane hand grips for wear, looseness, and/or deterioration.

Loosen/tighten the locknut if the wheel wobbles noticeably or binds to a stop.

Ensure the wheel bearings are clean and free of moisture.

CAUTION

As with any vehicle, the wheels and tires should be checked periodically for cracks 

and wear and should be replaced as necessary.

Ensure the hand brakes do not interfere with the tires when rolling.

Inspect/Adjust Periodically

Ensure the transport chair rolls straight (no excessive drag or pull to one side).

Inspect the seat and the back upholstery for rips or sagging.

Ensure that there is no excessive side movement or binding when the rear wheels are 
lifted and spun.

Ensure the wheel bearings are clean and free of moisture.

CAUTION

As with any vehicle, the wheels and tires should be checked periodically for cracks 

and wear and should be replaced as necessary.

Ensure that casters are free of debris.

Inspect the tires for flat spots and wear.

Ensure the hand brakes are easy to engage.

Clean the upholstery and armrests.

Check that all labels are present and legible. Replace if necessary.

Содержание Bariatric Transport





































Отзывы: