Invacare Azalea Assist, Руководство по обслуживанию, Страница: 8 / 40

Azalea®
3.
E
F
B
D
E
a. Mount the sliding seat
D
on the seat plate
B
.
b. Attach the stop block F .
c. Attach the front screws and nuts E .
d. Tighten the screws and nuts
E
.
4.
C
C
D
Press the release handle C and push the sliding seat D forwards.
5.
G
G
Attach and tighten the rear screws and nuts
G
.
6.
A
a. Re-mount the seat plate and the sliding seat on the seat
frame.
b. Re-mount and tighten the screws and nuts for the seat plate
A
.
2.8 Azalea Base seat attachment
Seat plate
A
B
C
The seat plate can either be used as a base for a seat cushion
or for attaching seat shells and other seating modules.
•
The seat plate C can either be used as a base for a seat cushion
or for attaching seat shells and other seating modules.
•
When delivered, the seat base is fixated with two screws
A
.
•
If a seat shell is to be attached, the seat plate needs to be fixated
with four additional screws
B
. These are delivered with the
wheelchair.
The seat plate is adjustable in depth.
Seat plate with wedge
The seat plate with wedges is an option that gives the
possibility of 5° extra tilt either in front or in the back.
CAUTION!
Risk of damage
The one-piece moulded seat attachments might break.
– The back should not be reclined when the Azalea Base
is equipped with one-piece moulded seat attachments.
H-bracket
A
B
A H-bracket
B
Attachment screws
The H-bracket is used when attaching a quick-release seat
shell to the Azalea Base.
The H-bracket is adjustable in depth.
8 1580313-B