10
Ins
taller N
otes Finishing U
p
1. To switch into and out of sources, use the “soft” button in the bottom left-
hand corner of the screen.
2. Locate the envelope containing the navigation software SD card, and
insert it into the Prodigy brain. Install the plastic cover (two small Phillips
screws) on the brain to protect the SD card.
3. The navigation software will take you through a basic setup. It is defaulted
for the United States, so you can click “next” through the entire process.
The final stage of the initial setup may look for a network connection.
Click “Retry Later,” as this feature is no longer offered. All settings can be
changed in the “Settings” menu at a later time if need be.
4. Be sure to leave the Navigation Quick Start Guide/User’s Manual” in the
vehicle for the End User.
1. Be sure to test unit before re-assembling the vehicle. You don’t want to
have to go back and Disassemble/Reassemble the vehicle.
2.
After you have finished the installation, keep the provided Intraphex
mouse. You may need to use it one day – it will make an excellent
addition to the “junk” drawer of your toolbox.
3. Only one USB port will work with the Intraphex mouse. If you try one port
and it doesn’t work, simply use the other. On the Prodigy 1.2 system,
there may be a white WIFI dongle installed into the port that works for the
mouse. In this case, simply remove the dongle and replace it after you
have finished your setup.
