Intraphex P1N-GM11, Руководство по установке

Страница: 14 / 22


PLUG GVIF AND MONITOR T-HARNESS
INTO FACTORY MONITOR AND
REMOUNT MONITOR WITH FOUR 7MM
SCREWS.

REPLACE THE RADIO CONTROL PANEL.
AT THIS POINT YOU SHOULD BE ABLE TO
PERFORM SETUP AND ADJUSTMENTS,
BEFORE RE-ISTALLATION OF ALL TRIM
PANELS.

TURN ON KEY TO THE IGN POSITION
AND PRESS THE “HOME” KEY FOR THREE
SECONDS. THE INTERFACE SHOULD
SWITCH TO THE “NAVI” SCREEN.
(TOUCH WILL NOT WORK YET) IF
“HOME” KEY DOES NOT WORK TRY THE
“TONE” KEY.
YOU WILL SET THIS UP CORRECTLY
ONCE INSIDE OF INTERFACE SCREEN.

ONCE INSIDE OF INTERFACE SCREEN
(YOU WILL SEE MAIN MENU) PRESS
AND HOLD TOUCH SCREEN IN ANY
LOCATION FOR ABOUT 10 SECONDS.
YOU WILL ENTER THE “ON SCREEN
MENU” FOR THE INTERFACE.